Frequently Asked Questions

Product Information

EZ-TUBE / EZ-PIER:

 While we recommend mortar, you could use a high quality building adhesive that is rated for below grade.

Yes, you can easily install a post base on top of the stack using the included threaded rod and top bolt and washer to make the connection.

Yes, they are engineered and have been ICC certified. ICC Certification # ESR-5035

Yes, they can support an 8×8 post. 

The base weighs in at 120 lbs

Yes, though you would want to make sure you use mortar in between each section and let this cure before using a sling to place this into the ground.

Yes, though you would want to make sure you use mortar in between each section and let this cure before using a sling to place this into the ground.

The depth of the 1/2″ threaded insert in the EZ-PIER is 1″

Simpson Post Bases are recommended for use with our EZ-PIER and EZ-TUBE when mounting lumber.

PRO-PAD:

It depends on the tank manufacturer, check with your energy company and verify the base of the tank is less than 24 inches in Diameter.

We don’t have a max weight rating on the pad, but it will certainly carry several hundred pounds. It was designed to carry the load of a filled upright propane tank.

Yes, absolutely! That is exactly what this pad was designed to support. 

General Information

Check out our dealer/wholesaler/rep locator. If you don’t find a dealer near you check with your nearest Home Depot or Lowe’s or on their websites. We ship products through Home Depot and Lowe’s nationally. We also ship direct to businesses, homes and job sites all over the US and in some areas of Canada. Give us a call at +1.603.338.0002 and we will get you a quote for your project.

Still Need Help?

Can’t find the specific information that you’re looking for?